952.431.1399 - Bloomington, MN
Hey guys. Due to the shop being too busy, I would like to direct all technical questions to this thread. We get a lot of calls throughout the day for random technical questions that distract us from our current projects and customers' cars. It's not that we do not want to help, we do but that...
You heard it. We will meet or beat any competitors' prices on parts other than sales, specials, or promotions.
Full Blown Motor sports 6915 146th st. Apple Valley, MN 55124 952-431-1399 www.fullblownmotorsports.net Staff: Paul: Service writer/sales LJ: Owner, tuner, technician, fabricator Chuck: technician, fabricator
lately i've been researching kits to purchase for my 07 civic si, and the idea of having a custom setup occurred to me. what I know I want from the kit: tubular top or bottom mount mani 3" downpipe dumptube (possibly recirculated) intake
hey paul i just tryed calling and the phone number said not in service so just wondering what the new number was
I'm clearancing out my stock of competition clutch products to bring in more to cater to you. What I have is: 94+ B-series 3x stage 5 upgraded $410 3x stage 4 $310 1x stage 5 $310
I wanted to say thanks to Paul for one of the best costumer service i have got...Thanks to Andrew for the rewiring and LJ for tuning my 2.5RS for me and for answering my newbie question........ I would recommend them to anyone.....
do you guys do em? if so, i need my hot side done... 09 cobalt ss turbo...
We are currently not stocking any slicks and wheels right now but I hope to in the future. Just letting you know that we can order them per order basis though. We can get: Exospeed/Lenso VPD wheels Exospeed 2piece racing wheels M&H tires Mickey Thompson tires
hey guys i heard that there might someone here that could weld a small crack i have in my 5zigen fno1r-c. its at the very edge of the rim so basically at the bead. its from the edge to maybe and inch long.
hey was wondering if you guys new the 41mm tial waste gate flangs its square with 4 bolts. i want it put on the ram horn style manifold with a i belive t3 flange for the sc61 turbo. http://www.fullblownmotorsports.net/product_info.php/products_id/171 that manifold thanks
Thanks for the awesome custom intake. My car sounds awesome now!
Hey guys, I have a couple sets of Avid Racing motor mounts for 92-95 civic and 94+ integras with B-series mounts I am putting on sale. These are made from billet aluminum and offer a lifetime warranty on the mounts and bushings. Avid Racing has been making mounts for years and lead the pack in...
Thanks for the tune yesterday LJ! Also, thanks for the ride Paulzy since it was out of your way...not to mention in a gas guzzling excursion! haha It's too bad the clutch couldn't handle more than 500whp as I would have loved to see what that turbo can do. P.S. e85 ownz!
I need a rear resonator delete on a 06 VW GLI or Jetta 2.0T (most likely in computer system). Aluminum bent 2.25 piping if you could to replace it. it would look along the lines of this. http://store.42draftdesigns.com/assets/images/exhaust/fsires/fsi_res_01.jpg If I could also get a...
We just finished up an 04 Sti that made pretty good power. This was done on 21psi. We got a little bit of boost spike, but other then that everything was flawless. Time for a dual pump hanger and more boost. Full Blown Built short block 1000cc on e85 PTE 6262 Billet Full Blown Up...
Hi guys, how much does it cost to install a set of springs onto a is300? Thank you.
My buddy was in there getting a baseline tune. I heard he only had 1,3,5 gears but you still managed with that. Thanks for that and the tune! I know there is more power in the motor but this is a good tune for him to get used to, then we can turn it up! Thanks again! -Colin
I have some skunk2 products in stock. Please contact me for the lowest prices possible. I currently have in stock: 70mm throttle bodies front camber kits for hondas B-series stage2 tuner cams B-series pro1 cams I can get anything from them as I am an official skunk2 dealer so if I don't...
Just got off the dyno with our s2000. This was at 33psi, I think we can do 800hp on this stock motor. We're going to take this one to the track soon, then crank her up some more :biggrin: http://i43.tinypic.com/v5j3f6.jpg http://i39.tinypic.com/fedzx2.jpg
Posted this over on RS's forum as they were recommended to me intially, but the lack of a response from RS is indicating they aren't interested so I figured I'd post over here. I'm looking for a reputable shop to install a full-race turbo setup on my 2007 civic si. shops here in wisconsin have...
We now offer Bosch High Impedence top feed fuel injectors. These are all the rave right now in the tuning world. Get these at the best prices that are offered. PM me for more info. I currently carry the 900cc(companies claim these as their 1000cc injectors) and the 2150cc injectors. They...
We've always been a Competition clutch dealer but now I'm proud say we can offer the lowest prices. PM or call me with what you need and I can shoot you a price. If I don't have it in stock, I can get it very quickly. What I currently have in stock: 92+ B-series: stage 4 stage 5 stage 5...
There are currently 1 users browsing this forum. (0 members & 1 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
